PB 10 XL with Auger System
The PB 10 XL, when paired with our auger system, is suitable for testing small batches of cementitious and adobe materials in a laboratory or university setting. This is useful for evaluating different types of materials before using larger scale systems, such as the Scara Elite Roadrunner Rail System. It is important to note that the PB 10 XL print bed has a maximum weight capacity of 30 pounds, so it is not recommended to exceed this limit. The auger system is not compatible with clay.
The PB 10 XL ceramic 3D printer can print vessels up to 28" (71cm) high. The 10 XL has the largest extruder out of all of our printers, holding 18 pounds of clay. This lets you print more and reload less. With a 4000ml extruder, you can print dozens of objects and still have clay left over.
Specifications
Printing Envelope:
X-19.3" (490 mm)
Y-19.3" (490 mm)
Z-28" (710 mm)
*Note, Auger Z height print envelope is approximately 24"
Printer size:
W-32” L-40” H-47”
Normal operation space needed 3600ml: W-32” L-40” H-82”
Normal operation space needed 4000ml: W-32” L-40” H-85”
Maximum operation space needed: W-35” L-42” H-89”
Print Bed 15x15in” (381x381mm)
Height with the extruder fully extended is 89” (2260mm)
Weight with extruder: 60 lbs.
Recommended print speed: 1.1”/s’ to 7.9’’/s (30 to 200 mm/s)
Maximum print speed: 7.9in”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~6 amps, ~144 Watts
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through the web interface, no apps or software installation.
What's included
1. PB 10 XL with Auger System
2. Closed loop stepper on X, Y, Z, extruder
3. Optional 3600ml or 4000ml extruder, 2 tubes and anti-Rotator, Anodized aluminum print nozzles (in sizes: 3, 4, 5, and 6mm)
4. 2 nozzles, 1/2 in and 3/4 in. 1 in opening with no nozzle
5. XL Parts Box
6. Power Supply
7. Wall mount bracket