PB 10 Pro
PB 10 PRO is the upgraded version of the Potterbot 10 Micro printer. The Pro is larger and utilizes hybrid closed loop stepper motors that nearly double its power.
The PB 10 PRO is the first printer in our lineup that uses hybrid motors on every axis. Utilizing the hybrid stepper motor with our clay extruder gives you faster extrusion speeds and higher volume output. This means you can use larger nozzles and reduce print time. The hybrid stepper motor on the extruder is capable of higher forces so a thicker paste material can be extruded. The motors have their own internal torque settings, so if there is a blockage, they will shut themselves off automatically.
As the name suggests, this printer is preferred by professionals who like to print multiple vessels at a time or many single prints back to back.
Specifications
Printing Envelope:
X-16” (415mm)
Y-16” (405mm)
Z-20” (500mm)
Printer size:
W-26” L-34” H-36”
Operation space needed: W-32” L-40” H-78”
Bat size (printer bed): 15x15in” (381x381mm)
Height to the top of the extruder fully extended is 78” (1981mm)
Weight with extruder: 46 lbs. (20kg)
Recommended print speed: 1.1”/s’ to 7.9’’/s (30 to 200 mm/s)
Maximum print speed: 7.9in”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~4 amps, ~96 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through web interface, no apps or software installation.
What's Included
1. PB 10 PRO
2. Closed loop stepper on X, Y, Z, extruder
3. 2000ml extruder, 2 tubes
4. 4 anodized aluminum nozzles (standard sizes: 3, 4, 5, and 6mm)
5. Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws
6. Power Supply